Step Out Drilling Doubles Mineralised Strike Over MRE Areas
Released
Released
Announcement PDF
ASX Announcement
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited |ASX: VRL | FSE: 48B0
ACN 122 995 073
Step-Out Drilling Extends Mineralised Strike by >1km across Korong and Waihi
Deposits – Along Strike and at Depth of Resource Boundaries
HIGHLIGHTS
RESOURCE EXTENSION DRILLING BOOSTS MINERALISATION ALONG STRIKE AND AT DEPTH
• Step-out drilling has significantly increased the confirmed mineralised strike at both the Korong (139koz)
and Waihi (15koz) deposits, with over 1km of gold confirmed along strike and at depth outside the existing
resource envelopes – and remains open
WAIHI – STRIKE EXTENDED FROM ~150M RESOURCE ENVELOPE TO 800M OF ANOMALOUS
MINERALISATION AND 70M BELOW CURRENT RESOURCE DEPTH
• Step-out drilling at Waihi extends mineralised strike from ~150m to over ~800m, with high-grade character
maintained in extensions including 3.2m @ 5.27g/t Au incl. 0.8m @ 21.3g/t Au intercepted ~200m from the
main resource envelope, with mineralisation remaining open
• Waihi diamond hole WHDD25001 also returned 0.9m @ 4.20g/t Au from 179m depth, ~70m below the
extent of the current resource envelope (110m), and remains open at depth
• Waihi mineralised strike more than tripled with shallow step-out intercepts including:
o 3.2m @ 5.27g/t Au from 60m o 1.7m @ 1.76g/t Au from 32m (WHRC25068)
(incl. 0.8m @ 21.3g/t Au) (WHRC25007) o 0.8m @ 0.74g/t Au from 9m (WHRC25067)
o 2.4m @ 1.75g/t Au from 17m (WHRC25005) o 0.8m @ 0.61g/t Au from 39m (WHRC25066)
o 6.5m @ 0.86g/t Au from 28m (WHRC25004) o 0.9m @ 4.20g/t Au from 179m (WHDD25001)
KORONG – STRIKE EXTENDED FROM 900M RESOURCE ENVELOPE TO 1,400M AND ~200M BELOW
CURRENT RESOURCE DEPTH
• Gold mineralisation at Korong confirmed up to 500m north of the Korong resource boundary and 50m south,
with shallow step-out intercepts including:
o 2.9m @ 2.51g/t Au from 8m (A1RC25003) o 1m @ 1.40g/t Au from 31m (KORC25079)
o 1.9m @ 1.31g/t Au from 52m (KORC25077) o 1m @ 0.73g/t Au from 63m (KORC25080)
o 1.9m @ 1.29g/t Au from 8m (A1RC25001) o 1m @ 0.63g/t Au from 87m (A1RC25004)
o 1m @ 1.41g/t Au from 35m (KORC25076) o 2.4m @ 0.74g/t Au from 319m (KODD25004)
• Diamond hole KODD25004 also returned 2.4m @ 0.74g/t Au from 319m depth, ~200m below the extent of
the current resource envelope (120m), confirming mineralisation continues and remains open at depth
• Updated Mineral Resource Estimate from infill drilling on track for April 2026, with results to date strongly
supporting a confidence upgrade of a selected portion of Korong-Waihi deposits from JORC (2012) Inferred
to Indicated
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
Verity Resources Limited (ASX: VRL, FSE: 48B0) (Verity or the Company) is pleased to report that step-out
drilling at the 100%-owned Monument Gold Project has significantly increased the confirmed mineralised
strike at both the Korong (139koz) and Waihi (15koz) gold deposits. Gold mineralisation within the BIF main
lode has now been confirmed over more than 1,400m at Korong (previously ~900m within the resource
envelope) and over 800m at Waihi (previously ~150m within the resource envelope). Both deposits remain
open along strike and at depth.
Director, Patrick Volpe, commented:
“This drilling campaign has significantly increased the known mineralised strike at both Korong and
Waihi. At Korong, we have now confirmed gold-bearing BIF over more than 1,400 metres of
continuous strike – approx. ~50% increase on the ~900m resource envelope - with mineralisation
remaining open in both directions. At Waihi, the mineralised footprint has also more than tripled to
over 800 metres.
These are not subtle extensions. The step-out drilling has fundamentally expanded the scale of both
deposits and demonstrates that the current 154,000 ounce resource captures only a fraction of the
total mineralised system. At Korong, gold grades are maintained at shallow depths well beyond the
resource boundary, including 2.9m @ 2.51g/t Au from just 8m, while diamond drilling has
confirmed the BIF continues to at least 319m depth, almost 200m outside the existing resource
depth. At Waihi, step-out intercepts include 3.2m @ 5.27g/t Au (incl. 0.8m @ 21.3g/t Au) – ~200m
outside the resource envelope and 0.9m @ 4.20g/t Au from 179m depth - ~70m below the resource
envelope - confirm the high-grade character is maintained in these extensions.
The replacement-style mineralisation at both deposits produces coherent, continuous ore bodies
that are well suited to systematic resource expansion. With the mineralised strike now significantly
expanded at both Korong and Waihi, the growth potential at Monument is substantial – and we
are still at an early stage of testing what is a 20km prospective BIF corridor.
Work is now underway on an updated Mineral Resource Estimate that will incorporate all results
from the 2025–2026 drilling campaign. We look forward to delivering this update to shareholders
as a key milestone in demonstrating the growth trajectory of the Monument Gold Project.”
Korong Resource Extensions
Assays from 8 strike extension RC drill holes at Korong totalling 652m have been received (Figure 1, Appendix
A). Drilling targeted positions outside the existing Korong resource envelope to better constrain the
mineralisation footprint and test for potential strike extensions.
Shallow step-out intercepts from this program include:
o 2.9m @ 2.51g/t Au from 8m (A1RC25003)
o 1.9m @ 1.31g/t Au from 52m (KORC25077)
o 1.9m @ 1.29g/t Au from 8m (A1RC25001)
o 1m @ 1.41g/t Au from 35m (KORC25076)
o 1m @ 1.40g/t Au from 31m (KORC25079)
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
o 1m @ 0.73g/t Au from 63m (KORC25080)
o 1m @ 0.63g/t Au from 87m (A1RC25004)
Results confirm that mineralisation hosted within the BIF main lode is open along strike both to the north and
south of the existing resource envelope (Appendix B). The combination of step-out intercepts beyond the
current resource boundary and explicit open strike directions supports the potential to progressively step out
along the BIF main lode to confirm continuity, then tighten drilling where warranted to support resource
expansion.
Importantly, the near-surface intercepts at Korong (including 2.9m @ 2.51g/t Au from just 8m and 1.9m @
1.29g/t Au from 8m) demonstrate that gold grades are maintained at shallow depths outside the current
resource boundary. Shallow, near-surface mineralisation has positive implications for potential open-pit
mining scenarios. The existing 139koz Inferred Resource at Korong is calculated at a 0.5g/t cut-off grade, and
the step-out intercepts are consistent with, and in several cases well above, this cut-off threshold.
Combined with diamond step-out hole KODD25004 that intersected the main Korong BIF lode at ~319m
downhole with assays returning 2.4m @ 0.74g/t Au (ASX release 18 December 2025), and earlier step-out
results from the A1 area up to 720m north of the resource boundary, the total confirmed mineralised strike
at Korong has now been extended from approximately 900m (the existing resource footprint) to over
1,400m. This represents a substantial increase in the known mineralised extent along the BIF main lode, with
the system remaining open in both strike directions and at depth.
Figure 1. Korong Long Section view looking from the hanging wall down onto the plane of mineralisation. Outline of
the current 139koz Au Inferred Resource shown (black dashed). Step-out drilling has extended the confirmed
mineralised strike from ~900m (resource envelope) to over 1,400m. Mineralisation remains open in both strike
directions and at depth.
Waihi Resource Extensions
Assays from 7 strike extension RC and 1 diamond drill holes at Waihi totalling 542m have been received (Figure
2, Appendix A). Drilling targeted positions outside the existing Waihi resource envelope to constrain the
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
mineralisation and test for potential strike extensions along the BIF main lode.
Shallow step-out intercepts at Waihi include:
o 3.2m @ 5.27g/t Au from 25m including 0.8m @ 21.3g/t Au (WHRC25007)
o 2.4m @ 5.41g/t Au from 87m (WHRC25026)
o 3.2m @ 4.14g/t from 110m (WHRC25020A)
o 1.7m @ 1.76g/t Au from 32m (WHRC25068)
o 2.4m @ 1.75g/t Au from 17m (WHRC25005)
o 0.8m @ 0.74g/t Au from 9m (WHRC25067)
o 0.8m @ 0.61g/t Au from 39m (WHRC25066)
o 6.5m @ 0.86g/t Au from 28m (WHRC25004)
o 0.9m @ 4.20g/t Au from 179m (WHDD25001) – down dip intercept, ~70m below
resource envelope
Results indicate mineralisation is hosted within the BIF main lode, with strike demonstrated outside the
current Waihi resource outline. The main lode mineralisation is open to the north, while the southern extent
has been effectively constrained to the extent of this program’s step-out drilling.
Figure 2. Waihi Long Section view looking from the hanging wall down onto the plane of mineralisation. Outline of the current
15koz Au Inferred Resource shown (black dashed). Step-out drilling has extended the confirmed mineralised strike from ~150m
(resource envelope) to over 800m. The deposit remains open to the north along the BIF main lode, and at depth.
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
The constraining of the southern boundary at Waihi is an important geological outcome because it defines the
geometry of the deposit and focuses future exploration investment to the north, where the BIF stratigraphy
and associated gold mineralisation remain open. The Waihi deposit, though smaller than Korong at 15koz
Inferred, sits on the same ~20km BIF corridor and shares the same replacement-style mineralisation character.
Northern extensions at Waihi have the potential to progressively grow this deposit along the BIF main lode
toward the broader corridor between Waihi and Korong.
Including previously reported step-out results – particularly WHRC25007 (3.2m @ 5.27g/t Au including 0.8m
@ 21.3g/t Au from 25m), WHRC25004 (6.5m @ 0.86g/t Au from 28m), WHRC25005 (2.4m @ 1.75g/t Au from
17m), and diamond hole WHDD25001 (0.9m @ 4.20g/t Au from 179m outside the resource envelope) – the
confirmed mineralised strike at Waihi has now been extended from approximately 150m (the existing
resource footprint) to over 800m. This represents more than triple the known mineralised extent, with the
high-grade character of the Waihi deposit (resource grade 2.1g/t Au, 50% above the global average)
maintained in the extensions. The combination of high-grade surface step-outs, diamond-confirmed depth
extensions to 179m, and the latest northern step-out results demonstrates that Waihi has substantial growth
potential along the BIF main lode.
Geological Context and Growth Potential
The Korong and Waihi deposits are hosted within a package of Archaean banded iron formation (BIF) on the
western limb of the Mt Margaret Anticline in the Laverton Goldfields. Gold mineralisation is controlled by a
chemical replacement process in which gold-bearing hydrothermal fluids have selectively replaced magnetite
within the BIF, producing a distinctive sulphide-quartz assemblage. This replacement-style mineralisation is
well documented in the region and is the same process responsible for the 1.4 million ounce Westralia gold
deposit, located immediately along strike to the southeast on interpreted equivalent BIF stratigraphy.
The BIF sequence at Monument consists of several individual BIF units separated by intercalated
metasiltstones, minor ultramafic rocks and mafic volcanics. The sequence dips steeply to the east and faces
westwards, interpreted as a possible overturned limb of a regional anticline. This structural setting provides a
favourable trap for gold-bearing fluids and explains the lateral continuity of mineralisation observed along
strike.
The replacement mineralisation style is significant for several reasons:
• it tends to produce coherent, laterally continuous ore bodies that are amenable to systematic
resource definition drilling; it can host bulk-mineable grades over meaningful widths; and
• it is a well-understood ore system that reduces geological risk during resource estimation.
The metallurgical characteristics are also favourable, with preliminary testwork at Korong indicating gold
recoveries averaging 92.75% (ASX announcement 23 January 2026).
Next Steps and Catalysts
All assays from the 2025–2026 drill campaign have now been returned. Work is underway on an updated
Mineral Resource Estimate (MRE) for both Korong and Waihi, which will incorporate all new drilling data and
feed into wider technical studies across the Monument Project. The next catalysts include:
• Exploration results from the Triton, A1 and Perseverance prospects along the broader
Monument corridor, where gold mineralisation has previously been confirmed at every
prospect tested;
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
• Updated Monument MRE expected April 2026, incorporating all ~11,000m of new drilling
combined with ~16,000m of validated historical data, to increase confidence in portions
of the existing global resource;
• Ongoing assessment of regional BIF and intrusion-related targets across the enlarged
~405km² Monument footprint;
• Evaluating the impact of step-out drilling on the resource footprint and total ounces; and
• Next phase of resource definition and extension drilling.
Monument Gold Project
The Monument Gold Project is in WA’s world-class Laverton Gold District and comprises ~405km2 of tenure
located approximately 40km west of Laverton, adjacent and along strike of Genesis Minerals’ (ASX: GMD)
3.3Moz Au Mt Morgan Project. A Mineral Resource Estimate of 154koz of gold (see ASX announcement on 2
August 2021) was undertaken on the Korong and Waihi deposits, which occur along ~20km of relatively
untested banded iron formation, interpreted to be the same unit that hosts the 1.4Moz Westralia gold deposit,
located immediately southeast of Monument.
Critically, only ~10% of the potential 20km BIF strike length has been drilled with detailed air core and reverse
circulation drilling to date, leaving substantial exploration upside. A further approximately 60 priority targets
have been identified along the banded iron formation horizon and broader syenite-intrusion hosted settings,
representing significant resource upside potential beyond the current Korong and Waihi deposits.
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
Monument Gold Project location in the Laverton Gold District amongst major gold deposits and processing
infrastructure.
This announcement has been authorised for release by the Board of Verity Resources Limited.
For further information, please contact:
Verity Resources Limited
info@verityresources.com.au
About Verity Resources
Verity Resources owns 100% of the Monument Gold project located near Laverton in Western Australia. This
project currently has a JORC-compliant (2012) Inferred resource of 3.257 Mt @ 1.4 g/t for 154,000 ounces Au
(inferred resources calculated by CSA Global in 2021 to JORC 2012 compliance using a 0.5 g/t cut-off grade;
see 2 August 2021 ASX announcement for further information).
Verity Resources also holds a supply critical metals portfolio via a joint venture that includes rare earth
elements, lithium, gold, base and precious metals in Brazil, including licences in the “Lithium Valley” and Poços
de Caldas in the state of Minas Gerais. The Company also owns 70% of the Pimenta Project, a potential large-
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
scale REE project in eastern Minas Gerais.
Verity Resources also holds 100% of large critical metals projects in the Limpopo Mobile Belt in Botswana.
Maibele North currently hosts a JORC (2012) inferred resource of 2.4Mt @ 0.72% Ni and 0.21% Cu + PGE’s +
Co + Au.
Competent Persons Statement (Monument Gold Project, Western Australia)
The information in this report that relates to Exploration Targets and Exploration Results is based on recent and historical exploration
information compiled by Mr Michael Jackson, who is a Competent Person and a Member of the Australian Institute of Geoscientists.
Mr Jackson is a consultant to Verity Resources Limited. Mr Jackson has sufficient experience that is relevant to the style of
mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as
defined in the 2012 Edition of the “Australasian Code for the reporting of Exploration Results, Mineral Resources and Ore Reserves”.
Mr Jackson consents to the inclusion in the report of the matters based on his information in the form and context in which it appears.
Disclaimer
In relying on the above mentioned ASX announcement and pursuant to ASX Listing Rule 5.23.2, the Company confirms that it is
not aware of any new information or data that materially affects the information included in the above announcement. No
material exploration data or results are included in this document that have not previously been released publicly. The source of
all data or results have been referenced.
Forward-Looking Statements
This document may include forward-looking statements. Forward-looking statements include, but are not limited to, statements
concerning the Company’s mineral properties, planned exploration program(s) and other statements that are not historical facts.
When used in this document, the words such as "could," "plan," "estimate," "expect," "intend," "may,” "potential," "should," and
similar expressions are forward looking statements. All such statements are subject to certain risks and uncertainties, many of
which are difficult to predict and generally beyond the control of the Company, which could cause actual results to differ materially
from those expressed in, or implied or projected by, the forward-looking information and statements. Our audience is cautioned
not to place undue reliance on these forward-looking statements that speak only as of the date hereof, and we do not undertake
any obligation to revise and disseminate forward-looking statements to reflect events or circumstances after the date hereof, or
to reflect the occurrence of or non-occurrence of any events.
Monument Gold Project, Western Australia, Resource Information
Mineral Resource Estimate
Deposit Tonnes Grade (g/t) Au (Oz)
Korong 3,034,000 1.4 139,000
Waihi 223,000 2.1 15,000
Total 3,257,000 1.4 154,000
Table: Inferred Resource was calculated at Korong and Waihi by CSA Global Pty Ltd in 2021 (see Table 2) using a 0.5g/t cut-off grade. See
ASX announcement on 2 August 2021 “Mineral Resource Estimate Declared for Monument Gold Project”.
Reference to Previous Announcements
• ASX:VRL 12 March 2026 “5.41g/t Au at Waihi - Resource Upgrade on Track”
• ASX:VRL 27 January 2026 “Up to 21.3g/t Gold From Step Out Drilling at Waihi MRE”
• ASX:VRL 23 January 2026 “Initial Met Testing Korong”
• ASX:VRL 21 January 2026 “Further Gold Results Continue to Increase MRE Confidence”
• ASX:VRL 18 December 2025 “First Phase 2 Drill Results Deliver Strong Gold Intercepts”
• ASX:VRL 5 November 2025 “Diamond Drilling Completed Indicating Continuation of Korong and Waihi BIF Stratigraphy at
Depth”
• ASX:VRL 23 October 2025 “Up to 38g/t Au from Successful Phase 1 Drilling”
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
• ASX:VRL 25 September 2025 “Excellent Gold Results at Monument Gold Project”
• ASX:VRL 12 September 2025 “Historical Drill Validation Study Confirms High Grade Zones at Monument Gold Project”
• ASX:VRL 2 August 2021 “Mineral Resource Estimate Declared For Monument Gold Project”
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
JORC Code, 2012 Edition – Table 1
Appendix A – JORC CODE, 2012 Edition
Section 1 – Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature & quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc.).
These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to
ensure sample representivity & the
appropriate calibration of any measurement
tools or systems used.
• Aspects of the determination of
mineralisation that are Material to the
Public Report.
• In cases where ‘industry standard’ work has
been done this would be relatively simple
(e.g. ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation
may be required, such as where there is
coarse gold that has inherent sampling
problems. Unusual commodities or
mineralisation types (e.g. submarine
nodules) may warrant disclosure of detailed
information.
Reverse circulation (RC) percussion chip samples were
collected at 1m intervals from a rig mounted
cyclone and cone splitter, split into 2 to 2.5kg sub-
samples and collected into pre-numbered calico
bags.
AC drill spoil sampling consisted of even, single samples
collected from the 1m piles as 4m composites using
a scoop to obtain 2-3kg of material representative
of 4m of drilling and collected into pre-numbered
calico bags.
AC end of hole samples consisted of 1m composites of
fresh rock submitted for whole-rock, multi-element
analysis for rock characterisation collected into pre-
numbered calico bags.
Diamond Drill core is cut in half longitudinally and half
HQ core samples were submitted for assay analysis.
Sampling was generally undertaken on 1m intervals
subject to geological context, with a minimum
sample length of 0.2m and a maximum samples
length of 1.2m. The half core samples were placed
into pre-numbered calico bags.
The calico bag sub-samples were then submitted to an
independent laboratory where the entire sample
was pulverised to a nominal sample weight for Fire
Assay analysis (see Quality of assay data and
laboratory tests below).
.
Drilling
techniques
• Drill type (eg core, reverse circulation, open-
hole hammer, rotary air blast, auger,
Bangka, sonic, etc.) & details (e.g. core
diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other
type, whether core is oriented & if so, by
what method, etc.).If no site visits have
been undertaken indicate why this is the
case.
Reverse Circulation (RC)
All RC drilling was undertaken using 5¼ to 5¾ inch face
sampling bits.
Aircore (AC)
Face sampling AC drilling by Bostech Drilling achieved
hole diameter size of 3 1/4 inch.
Drilling was completed via air core blade for AC or
percussion hammer to penetrate hard rock when
encountered in the upper part of the weathering
profile.
Diamond
Drilling involved HQ diameter coring with electronic
backend core orientation for all runs in competent
fresh rock.
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
Drill sample
recovery
• Method of recording & assessing core &
chip sample recoveries & results assessed.
• Measures taken to maximise sample
recovery & ensure representative nature of
the samples.
• Whether a relationship exists between
sample recovery & grade & whether sample
bias may have occurred due to preferential
loss/gain of fine/coarse material
Reverse Circulation (RC)
Continuous visual monitoring and assessment of
sample recoveries was undertaken by suitably
qualified field staff (contract geologist and senior
field assistant).
Where low recoveries or wet samples were identified
these were recorded in the field sample data.
To aid in achieving high recoveries and maintaining a
dry sample a support truck mounted air booster
was used when necessary.
There is no evidence of sample bias.
Aircore (AC)
Sample recovery size and sample conditions (Eg. dry,
wet, moist) were recorded in the field sample data
booklet by visually assessing the sample piles.
Drilling involved frequent reaming to clean the hole at
the start of each new rod. Regular cleaning of the
cyclone using high-pressure air was undertaken to
avoid contamination from wet and moist samples.
Diamond
Core recovery is logged as part of the geological logging
process. Zones of partial recovery are logged as
such, zones of no recovery are logged as intervals
of core loss.
Diamond drillers use short runs to maximise recovery
in poor ground conditions. Competent core is
considered representative. The only risks to the
representivity of diamond core relate to selective
recoveries in highly broken ground or hole cave in.
No relationship exists between recovery and grade.
Logging • Whether core & chip samples have been
geologically & geotechnically logged to a
level of detail to support appropriate
Mineral Resource estimation, mining studies
& metallurgical studies.
• Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc.) photography.
• The total length & percentage of the
relevant intersections logged
Reverse Circulation (RC) & Aircore (AC)
RC & AC chip logging was undertaken by a suitably
qualified contract geologist who also monitored
quality of sampling.
Logging of RC & AC chips was undertaken by wet
sieving a representative portion of the overall 1m
sample recovered from the cyclone and collecting a
sub-sample into a labelled, 20 compartment chip
tray.
The logging is considered qualitative with weathering,
lithology, alteration, quartz veining and presence of
sulphides recorded in the logging template. All
chips trays were labelled with hole ID and sample
depth and photographed for future reference.
Logging and sampling of percussion chips at 1m
intervals is considered the preferred RC sample
interval to use in Mineral Resource Estimation.
Diamond
Core recovery is logged as part of the geological logging
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
process. Zones of partial recovery are logged as
such, zones of no recovery are logged as intervals
of core loss.
Diamond drillers use short runs to maximise recovery
in poor ground conditions. Competent core is
considered representative. The only risks to the
representivity of diamond core relate to selective
recoveries in highly broken ground or hole cave in.
Sub-sampling
techniques &
sample
preparation
• If core, whether cut or sawn & whether
quarter, half or all core taken.
• If non-core, whether riffled, tube sampled,
rotary split, etc.& whether sampled wet or
dry.
• For all sample types, the nature, quality &
appropriateness of the sample preparation
technique.
• Quality control procedures adopted for all
sub-sampling stages to maximise
representivity of samples.
• Measures taken to ensure that the sampling
is representative of the in situ material
collected, including for instance results for
field duplicate/second-half sampling.
• Whether sample sizes are appropriate to the
grain size of the material being sampled.
Reverse Circulation (RC)
All RC percussion sample material was passed through
a rig-mounted cyclone with a cone splitter attached
to the base and collected at 1m intervals into pre-
numbered calico bags.
At the completion of each 6m drill rod the cyclone and
cone splitter were cleaned to avoid contamination.
Duplicate Quality Control (QC) samples were taken
every 60 samples as an identical split in conjunction
with the corresponding original sample.
Certified reference materials obtained from an
external, independent supplier were inserted every
60 samples.
Sample preparation was undertaken at an
independent laboratory. Samples were dried and
pulverised to 85% passing 75µm.
Sample sizes are considered appropriate for the size
and nature of the material being sampled.
Aircore (AC)
AC sampling consisted of 4m composite samples
comprising 4 even scoops of the 1m sample
collected in pre-numbered calico bags. Sample
weights were 2 - 3 kg.
The AC 4m composite samples were collected into
numbered polyweave bags and dispatched to ALS
Laboratories, Kalgoorlie which is an accredited
laboratory.
AC samples were dried (nominal 110 degrees C),
crushed and pulverized to produce a homogenous
representative sub-sample for analysis. All samples
were pulverised utilising ALS preparation technique
PUL-23. A grind quality target of 85% passing 75μm
has been established and is relative to sample size,
type and hardness.
End of hole one metre samples were taken for multi-
element, whole rock analysis to characterise rock
type.
Diamond
Core sampling involved: Longitudinally cutting the core
in half with an automated core saw which is
appropriate for this style of mineralisation.
Half core is subject to two-stage crushing down to 2mm
832High Street
Kew EastVIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
then pulverisation to 75 micron to produce the final
assay subsample.
Lab duplicate samples are inserted every 50 samples by
taking a second 75 micron pulp from the duplicate
interval.
Blank samples are inserted every 60 samples and
adjacent to apparent mineralisation to monitor for
contamination in the crushing and pulverisation
stages.
Second half core sampling is not used in the
exploration stage, however the core is archived
should this be required in the future.
The sample size and sample preparation prior to
analysis are considered
Share your feedback
Discover