Maiden Indicated Resource at Monument Gold Project, Laverton
Released
Released
Announcement PDF
ASX Announcement
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
Monument Delivers Maiden Open Pit Indicated Resource
Updated JORC (2012) MRE delivers a maiden Indicated 66,200 ounces Au, with grade uplift and a new high-
grade depth-extension component
Verity Resources Limited (ASX: VRL, FSE: 48B0) (Verity or the Company) is pleased to announce an updated
JORC (2012) Mineral Resource Estimate (MRE) for its 100% owned Monument Gold Project in the Laverton
Goldfields, Western Australia. The updated MRE has delivered a Maiden Indicated Mineral Resource Estimate
(MRE) of 1.18Mt @ 1.75g/t Au for 66,200 ounces ofcontained gold, following the recently completed 11,000m
infill drill program. The total updated MRE now stands at 1.37Mt @ 1.72g/t Au for 137,700 ounces of
contained gold (Indicated + Inferred).
The 66,200-ounce Maiden Indicated MRE represents a step-change in the geological confidence of the Korong
and Waihi deposits compared to the 2021 MRE, which was reported entirely as Inferred. Importantly, 57,000
HIGHLIGHTS
• Maiden JORC (2012) Indicated Mineral Resource of 1.18Mt @ 1.75g/t Au for 66,200oz of contained gold,
representing a material upgrade in geological confidence from the previous 2021 MRE, which was reported
as entirely Inferred
• Material grade uplift since the 2021 MRE — grade has increased ~20% from 2021 MRE, reflecting refined
geological domaining and twinned-hole validation
• The updated MRE prioritises confidence, grade and rigorous economic reporting discipline, with material
now reported within optimised open-pit shells or below those shells in fresh rock using a higher
underground cut-off
• New underground Mineral Resource of 1.37Mt @ 1.75g/t Au for 77,100oz (Indicated + Inferred) below the
Korong and Waihi pit shells, providing a clear depth-extension component and long-term mine plan
optionality
• Total updated JORC (2012) Mineral Resource Estimate of 2.5Mt @ 1.72g/t Au for 137,700oz (Indicated +
Inferred), reported within optimised pit shells at a 0.5 g/t Au cut-off, and below those shells in fresh rock at
a 1.0 g/t Au cut-off
• Updated MRE provides a stronger platform to progress Monument toward development and mine
planning, with mining, metallurgical, geotechnical, environmental and processing pathway workstreams
continuing to advance
• 2025-2026 infill drill program has also identified further resource growth opportunities along strike at
both Korong and Waihi, where mineralisation remains open and priority follow-up areas have been defined
for resource growth along strike and at depth
• Monument hosts approximately 20km of prospective BIF strike in the Laverton Gold District - the same
geological unit interpreted to host the Genesis Minerals (ASX: GMD) 1.4Moz Westralia deposit - with only a
small proportion systematically drilled to date and additional BIF-hosted and intrusive-style gold targets
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
ounces of the Indicated component sits within the open-pit optimisation shell at a 0.5 g/t Au cut-off and is
amenable to potential open-pit mining, providing a stronger technical foundation for mining studies and
development planning.
The updated estimate also applies a more rigorous reasonable prospect of eventual economic extraction
(RPEEE) reporting framework, with open-pit material constrained within optimised pit shells and underground
material reported only in fresh rock below those shells using a higher 1.0g/t Au cut-off. As a result, the MRE
now represents a more selective, higher-confidence and development-focused resource base.
Beyond the Indicated category, the updated MRE has also defined a substantial high-grade underground
Mineral Resource component for the first time, comprising 1.37Mt @ 1.75 g/t Au for 77,100 ounces of
contained gold (Inferred) below the Korong and Waihi pit shells. This represents a clear depth-extension and
mine-life optionality dimension to the project, with high-grade mineralisation amenable to potential
underground mining sitting directly below the planned open-pit footprint.
Director, Patrick Volpe, commented:
“This is an important technical milestone for Verity. The 2025–2026 drill program was specifically
designed to convert a defined portion of the Korong and Waihi resource envelopes into the Indicated
category, and that objective has been delivered — with a 66,200oz maiden Indicated Resource, the
vast majority of which is amenable to open-pit mining at attractive grade.
Just as importantly, the work has materially improved both the confidence and the grade of the
Korong and Waihi deposits relative to the 2021 estimate, and has defined a meaningful high-grade
underground component for the first time. We now have a clear two-stage technical pathway: a
near-term open-pit starter operation supported by an Indicated Resource, with an underground
depth-extension component providing long-term mine plan optionality.
With the Indicated resource now in hand, we are focused on progressing Monument toward
development and mine planning, while at the same time continuing to unlock the further resource
growth targets identified during recent drilling, where mineralised strike has been significantly
extended at both Korong and Waihi and remains open.
We see substantial potential to continue adding ounces along this 20km prospective corridor as we
continue our ongoing exploration programs.”
The updated Mineral Resource provides a strong foundation for advancing the Korong-Waihi deposit toward
development. Key next steps include:
• advance scoping-level technical studies, including mining and geotechnical studies;
• assessment of development and processing pathways, including third-party processing options in the
Laverton region; and
• follow-up drilling to test resource growth opportunities along strike and at depth.
2026 Mineral Resource Estimate
The updated MRE is underpinned by the recently completed 11,000m RC and diamond drill program at up to
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
25m x 25m drill spacing1,2,3,4,5
inside the previously announced 2021 MRE envelope6
, which has facilitated
geological remodelling of all lodes in the MRE. Older drill data used in the 2021 MRE has been revalidated to a
high standard7
including new twin holes1
that confirm historical sampling and assaying. Select diamond drilling8
provided detail on the geological context of mineralisation and provided drill core samples for geotechnical
studies and a density study of 222 core samples that aided the improved confidence in this new MRE.
Category Classification
Cut-Off
(Au g/t)
Tonnes
Grade (Au
g/t)
Gold (koz)
Open Pit (OP) Reportable Mineral Resource
Korong Indicated 0.5 920,000 1.68 49.8
Korong Inferred 0.5 50,000 1.23 2.2
A1 (Korong North) Inferred 0.5 40,000 1.11 1.5
Waihi Indicated 0.5 110,000 2.11 7.2
Waihi Inferred 0.5 - - -
Total OP Indicated Indicated 0.5 1,030,000 1.73 57.0
Total OP Inferred Inferred 0.5 100,000 1.18 3.6
Total OP MRE 0.5 1,120,000 1.68 60.6
Underground Reportable Mineral Resource
Korong Main Indicated 1.0 100,000 1.67 5.4
Korong Main Inferred 1.0 1,120,000 1.72 61.9
Waihi Indicated 1.0 50,000 2.40 3.9
Waihi Inferred 1.0 100,000 1.79 6.0
Total UG Indicated Indicated 1.0 150,000 1.92 9.2
Total UG Inferred Inferred 1.0 1,220,000 1.72 67.8
Total UG MRE 1.0 1,370,000 1.75 77.1
Total 2026 Mineral Resource
Total Indicated Resource Indicated 1,180,000 1.75 66.2
Total Inferred Resource Inferred 1,320,000 1.69 71.5
Total MRE (Inferred + Indicated) 2,500,000 1.72 137.7
Table 1. Total Mineral Resources use a 0.5 g/t Au cutoff grade for material inside a AUD $5,500 pit shell and a 1.0 g/t Au cut-off
grade for material in fresh rock and below that pit shell.
Geology of the Monument Gold Project
The Korong and Waihi deposits are Banded Iron Formation (BIF) hosted sulphide replacement style
mineralisation zones that are along strike from, and geologically analogous to, the 1.4Moz Westralia gold
deposit (ASX:GMD) approximately 20km to the southeast. The main BIF horizon occurs at the contact between
an ultramafic footwall package of rocks and a hangingwall basalt.
Other BIF horizons occur between individual volcanic flows in the hangingwall basalt and are also mineralised,
but less continuously than the main BIF unit. Moderate to strong shearing related to the Celia Tectonic Zone
1
ASX:VRL 25 September 2025 “Excellent Gold Results at Monument Gold Project”
2
ASX:VRL 23 October 2025 “Up to 38g/t Au from Successful Phase 1 Drilling”
3
ASX:VRL 05 November 2025 “Diamond Drilling Complete - Intersects BIF Outside Resource”
4
ASX:VRL 18 December 2025 “First Phase 2 Drill Results Deliver Strong Gold Intercepts”
5
ASX:VRL 27 January 2026 “Up to 21.3g/t Gold From Step Out Drilling at Waihi MRE”
6
ASX:VRL 02 August 2021 “Mineral resource estimate declared for Monument Gold Project”
7
ASX:VRL 12 September 2025 “Excellent Gold Results at Monument Gold Project”
8
ASX:VRL 05 November 2025 “Diamond Drilling Complete - Intersects BIF Outside Resource”
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
overprints the entire zone, but because it is largely parallel, the primary stratigraphic sequence is largely intact.
Figure 1. A schematic cross section of the regional setting of Korong and Waihi with respect to the Celia Tectonic Zone.
The area has a stripped regolith profile resulting in lower saprolite and saprock mineralisation exposed at
surface and parts of the mineralised lodes occur as outcrop.
Data quality
The Verity resource drilling campaigns across 2025-2026 that underpin this new MRE consisted of RC drilling
with 1m samples taken from a rig-mounted cyclone-cone splitter or from HQ drill core sampled after geological
logging with nominal 1m sample width that varied to match geological boundaries.
The Verity drill campaigns comprised 151 drillholes and 57 assay batches of 50g charge fire assay. QAQC
measures in place included certified reference materials (3.3% of primary samples), field duplicates (2.2%),
sample preparation repeats (1.6%), pulp repeats (3.9%) and internal laboratory standards (10%). A consultant
database geologist (Core Geoscience) received all assays directly from the laboratory and checked
performance of blanks, standards and duplicates before either loading results directly into the database for
the project or requesting a re-assay from the laboratory. In practice, the few minor inconsistencies identified
across the drill campaigns meant that no re-assays were required from any of the batches. At the completion
of the drill campaigns Core Geoscience completed a full assessment of body of data and compiled a report to
Verity Resources. The report found no systemic issues, however umpire assays had not yet been completed at
the time of that report.
Cube Consulting was engaged to complete an independent audit of sampling and assaying of the Verity drill
campaigns including a site visit whilst RC drilling was underway and an inspection of drill core stored in
Kalgoorlie. The audit included recommendations for improvement including the frequency of field blanks and
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
size of the RC cone split sample taken, but ultimately advised that sampling and assay data “is of high quality
ensuring a low risk profile for the upcoming MRE.” Cube’s audit recommendations were adopted, as far as
practical, for the remainder of the drill campaign.
A historical drilling validation exercise7
included twinning historical results with Verity’s own drilling and
grouping historical drilling into data classes to assess its usefulness to the new MRE. That review concluded
that Class A drilling was suitable for informing the MRE. Lower confidence, and generally older, Class B drilling
was considered suitable for use in informing Inferred resources (but not areas of Indicated resource), but was
ultimately not included in the estimate unless exclusion of those holes would leave sections of the estimate
poorly informed. A third class of holes (Class C) were not considered suitable for use in the estimate at all based
on either drill type, holes that did not effectively pass through the target zone or holes with poor location data,
being either downhole or collar surveys.
Through the MRE process, density was identified as a key risk area of the estimate due to the very high contrast
in densities involved (e.g. fresh BIF potentially > 4.0 vs unconsolidated alluvium ~1.8). A density study collected
and compiled 222 density measurements from the Korong and Waihi drill core with attention to measuring
regolith densities with modified Archimedean methods (to account for voids and clay absorption of water) to
avoid the use of assumed densities in the final estimate. The final MRE assigned a single representative density
to domains defined by host rock domain and regolith domain.
Estimation Methodology
Geological Interpretation
Geological domains were modelled first from logging data only in Leapfrog Geo 3D mining software. Geology
domaining was then used to constrain mineralisation domain wireframes guided by a nominal cutoff grade
(initially 0.5 g/t but refined later to 0.35 g/t), but with precedence given to spatial continuity and correct
geological context over the strict grade-based criterion. Being stratigraphically controlled, the geometry of
mineralised lodes at Korong and Waihi is very simple and the interpretation risk is very low.
Regolith modelling distinguished lower saprolite, saprock and fresh rock with explicit wireframes identifying
zones of similar density, mining and metallurgical behaviour. For practical purposes of the MRE, the very small
amount of upper saprolite and alluvial cover was grouped into the lower saprolite domain. This domain does
not include the mineralised lodes.
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
Figure 2. A representative cross section of the main lode of the Waihi deposit. The SW-NE section is centred on MGA 394625mE
6836425mN approximately in the centre of the reported Waihi MRE.
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
Figure 3. A representative cross section of the Korong main lode and an isolated hangingwall intercept. The SW-NE section is
centred on MGA 398705mE 6831665mN approximately in the centre of the reported Korong MRE.
Block Sizes
The parent block size of 10mE x 10mY x 5mRL is approximately half the size of the nominal drill spacing of 25m
x 25m and suitable for 5mE x 5mY x 5mRL re-blocking to a multiple of SMU for engineering purposes. Sub-
celling to 1mE x 1mY x 1mRL permitted efficient filling of the wireframes with blocks.
Grade estimates
Three-dimensional Ordinary Kriging (3DOK) of one metre composites in Datamine Studio RM software
populated a block model with grade estimates. Dynamic anisotropy based on the local footwall orientation of
the mineralised surfaces was used for both the search neighbourhood and variogram orientations. Statistical
analysis showed the main mineralised surfaces approximated a log-normal grade distribution with a sub-grade
population apparent below 0.35g/t (hence the nominal wireframe cutoff grade) and the high-grade end tailing
off to approximately one ounce per tonne. A top cut of 31.10 g/t was applied to the one metre composite
samples to constrain any unrepresentative extreme outlier values, however in practice this meant a slight cut
to a single sample as no outlier population was apparent in the composite data.
Experimental variograms of the Korong main surface showed a high nugget of 40% of the total sill and a total
range of 80m. The total range was similar between the major and semi-major axes, so the variogram model
was simplified to a perfectly oblate variogram ellipse aligned with the geologically modelled plane of
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
mineralisation and with the minor axis 1/3 of the total range in the perpendicular direction. The lack of data in
subordinate Korong surfaces meant that the same variogram was applied to hangingwall and footwall surfaces.
Variography at Waihi was very similar although a slightly longer total range of 90m was modelled. The same
practical simplifications to a perfectly oblate variogram model were applied at Waihi.
The search neighbourhood used for 3DOK involved limiting the first pass search to a distance slightly smaller
than the total range of the variogram in a dynamic orientation controlled by the local orientation of the
footwall of the mineralised surface. The estimate allowed 7 to 14 samples limited by at least two octants and
a maximum of six samples in any one hole to limit the influence of any single drillhole on the result. If
insufficient samples were found in the first pass, a second pass used the same parameters but with a
significantly larger search distance.
Estimate validation consisted of visual comparison of local estimates against the drilling data, comparison of
mean composite grades against the estimate grades across individual surfaces and block versus wireframe
volume checks. Additional check estimates using 2D metal accumulation and inverse distance squared
estimation techniques did not highlight any issues in the 3DOK estimate.
Background grades were estimated into all non-mineralisation blocks from 1m composite top cut to 0.5g/t
allowing for re-blocking and engineering assessments with realistic background grades. Background grades do
not report to the Mineral Resource.
Classification
Classification categories were assigned to each mineralised domain using polygonal outlines defining zones
meeting the requisite criteria. Subject to consideration of additional geological factors like edge definition and
consistency of alteration and gold grade between adjacent drillholes, areas of 25m x 25m gave sufficient
confidence in the grade estimate to attain Indicated Mineral Resource status. Areas of the estimate of
consistent geological context where the drill spacing is sufficient to imply grade continuity have been classified
as Inferred Mineral Resource. Such zones are largely based on interpolation of grade rather than extrapolation
and Inferred material does not extend further than 60m from validated drill intercepts. The nominal drill
spacing for Inferred is 120m however early-stage drilling is commonly not on a regular orthogonal grid.
Densities
Densities were assigned to zones based on an aggregate of the host rock domain and the regolith domain. Each
density zone received a single assigned density value based on the representative density value determined
by the density study based on Korong and Waihi drill core. All mineralised domains in the MRE use values based
on measured data, some waste rock zones required assumed densities, but these were volumetrically minor.
Reporting Criteria
Verity Resources engaged Cube Consulting to model open pit shells for the purpose of assessing a reasonable
prospect of eventual economic extraction (RPEEE) with open pit mining. Any material inside that shell above a
0.5 g/t gold reports to the open pit MRE.
The shells used assumed mining and milling costs realistic for this scale of mining in Western Australia. Further
assumptions included an AUD $5,500 gold price and toll treatment with 40km of haulage. Metallurgical
recoveries of 89.0-92.75% were applied as per the Korong metallurgical testing described in Verity’s
announcement regarding initial metallurgical testing at Korong9
. The optimisation also took into account
9
ASX:VRL 23 January 2026 “Exceptional Gold Met Recoveries Average 92.75% at Korong MRE”
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
private royalties of up to 2% for the project.
The optimisation shells presented below are for RPEEE purposes only. The resulting pit shell does not
represent a mine design, mining study, production schedule or development plan. It does not constitute a
Scoping Study, Pre-Feasibility Study or Feasibility Study, and cannot be used to support the declaration of Ore
Reserves. There is no certainty that the Mineral Resources contained within the optimisation shell will be
economically extracted, or that the assumed parameters applied in the optimisation will be realised in
practice.
Figure 4. An oblique view looking northwest of the Korong MRE as reported coloured by gold grade. The wireframe defining
Verity’s RPEEE criterion is shown in transparent purple.
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
Figure 5. An oblique view looking southwest of the Waihi OP MRE as reported coloured by gold grade. The wireframe defining
Verity’s RPEEE criterion is shown in transparent purple.
The Korong and Waihi main optimisation shells each have a coherent block of main surface mineralisation
below them. A resource amenable to underground mining is reported here as below each pit where the
mineralisation is in fresh rock and greater than 1.0 g/t gold.
Environmental and Stakeholder Modifying Factors
Information collected to date indicates that no material environmental, social or stakeholder factors have been
identified that would reasonably be expected to impede the potential development of the Korong and Waihi
deposits. These assessments are based on early-stage investigations appropriate to the level of geological
confidence associated with a Mineral Resource Estimate and do not represent a comprehensive evaluation of
all environmental, heritage, permitting or stakeholder considerations that would be required for future mining
studies. Further stakeholder consultation and environmental studies will be undertaken as the project
progresses.
A flora and fauna survey completed over areas likely to be impacted by open pit mining of Korong and Waihi
(Botanica 2026) highlights no issues beyond normal considerations for mining in the Western Australian
Goldfields.
Initial field testing of groundwater at the Korong Project shows it is neutral to mildly alkaline with moderate
salinity. Water quality is comparable with nearby operations, and it can therefore be reasonably surmised that
groundwater will be operationally manageable.
Sulphur assays submitted for select drillholes at Korong provide a sulphur content profile through the whole
regolith profile and into fresh rock in the centre of and above the Korong MRE. Sulphide-rich rock types are
constrained to mineralised zones of the Korong and Waihi deposits with high sulphide waste rock being
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
uncommon and likely a volumetrically very small percentage of expected waste rock. Initial Acid–base
accounting (ABA) testwork at Korong indicates the higher sulphide waste rocks are non‑acid forming (NAF)
material with strong neutralising capacity in the footwall waste rock. Similar testing for Waihi is still
progressing, however given the geological setting is the same, a similar result is expected. There is no evidence
of elevated PAF/AMD risk, and standard Eastern Goldfields water and waste management practices would be
appropriate should mining proceed.
Ethnographic and archaeological surveys have been completed on behalf of Verity resources over the
Monument Gold Project including an archaeological survey over the specific proposed mine footprint areas.
Based on these surveys, there is sufficient space to conduct open pit mining of the resource and place
associated infrastructure without affecting aboriginal heritage.
Comparison to the 2021 MRE
The 2026 MRE represents a geological re-statement of the Monument Gold Project relative to the 2021 MRE,
underpinned by extensive infill drilling, new measured density data, updated geological and regolith models,
and the rigorous application of RPEEE optimisation. The simple geological setting means the overall geological
interpretation has not changed materially, but the geological and regolith models are significantly more refined
with the new drill data.
Three features distinguish the 2026 MRE from its 2021 predecessor:
• Confidence — the 2026 MRE introduces an Indicated category of 66,200 ounces, where the 2021 MRE was
reported entirely as an Inferred Mineral Resource.
• Grade — the 2026 MRE reports a higher gold grade than the 2021 MRE, reflecting tighter, better-
constrained mineralisation domains- (the 2021 Korong MRE was reported at 1.4 g/t Au, compared with
1.68 g/t Au in this 2026 MRE).
• Reporting discipline — the 2026 MRE applies a more rigorous RPEEE framework with optimised open-pit
shells and a higher 1.0 g/t Au underground cut-off, producing an estimate that is supported by a tested
economic basis and which excludes lower-grade marginal material that does not meet RPEEE criteria at the
assumed gold price.
Reporting fewer ounces with greater confidence is, in the Company's view, the appropriate outcome of a well-
designed resource definition program and provides a more robust foundation for ongoing development
studies than would a larger but lower-confidence estimate.
Waterfall charts best explain the development of the Monument MRE since the 2021 MRE. These charts
explain the total changes in contained gold for the estimate. Note that these charts relate to the total resource
and do not account for the major outcome of this MRE being the significantly increased confidence and
therefore classification assignment of the MRE.
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
Figure 6. A waterfall chart for Korong showing changes from the previous MRE. The new interpretation produced slightly tighter,
higher grade mineralisation domains and new density data resulted in fewer tonnes at higher grade. Extensional drilling added
approximately 5% to the breadth of the resource, but more stringent RPEEE (optimisation shells and a higher UG resource cutoff
grade meant a lot of low grade material no longer reports to inferred resources.
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
Figure 7. A waterfall chart showing changes from the previous Waihi MRE. New drilling did not match some of the higher grade
intercepts that were driving sections of the 2021 estimate. New density data resulted in a small increase in tonnes, but there was
very little new drilling beyond the extents of the old mineralisation model for Waihi. Much of the mineralisation modelled in the
old estimate did not constitute a resource due to lack of drill density and therefore confidence. The largest increase in contained
ounces is from infill drilling upgrading these zones into Inferred resource.
Monument Gold Project
The Monument Gold Project is in WA’s world-class Laverton Gold District and comprises ~405km2
of tenure
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
located approximately 40km west of Laverton, adjacent and along strike of Genesis Minerals’ (ASX: GMD)
3.3Moz Au Mt Morgan Project. An Inferred + Indicated Mineral Resource Estimate of 2.5Mt @ 1.72g/t Au for
137,700oz (66koz Indicated + 72koz Inferred) was undertaken on the Korong and Waihi deposits, which occur
along ~20km of relatively untested banded iron formation, interpreted to be the same unit that hosts the
1.4Moz Westralia gold deposit, located immediately southeast of Monument.
Critically, only a small proportion of the potential 20km BIF strike length has been drilled with detailed air core
and reverse circulation drilling to date, leaving substantial exploration upside. A further approximately 60
priority targets have been identified along the banded iron formation horizon and broader syenite-intrusion
hosted settings, representing significant resource upside potential beyond the current Korong and Waihi
deposits.
Monument Gold Project location in the Laverton Gold District amongst major gold deposits
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
Monument Gold Project location adjacent to Genesis Minerals’ 3.3Moz Laverton Project
This announcement has been authorised for release by the Board of Verity Resources Limited.
For further information, please contact:
Verity Resources Limited
info@verityresources.com.au
832 High Street
Kew East VIC 3102
info@verityresources.com.au
Verity Resources Limited | ASX: VRL | FSE: 48B0
ACN 122 995 073
About Verity Resources
Verity Resources owns 100% of the Monument Gold Project located near Laverton in Western Australia. The Project hosts a JORC-
compliant (2012) Mineral Resource Estimate of 1.37Mt @ 1.72g/t Au for 137,700oz, comprising 1.18Mt @ 1.75g/t Au for 66,200
ounces Indicated and 1.32 Mt @ 1.69g/t Au for 71,100 ounces Inferred. The MRE is reported above a 0.5 g/t Au cut-off grade for
material amenable to open pit mining, with a portion of fresh-rock material below the Korong and Waihi open pit shells reported
above a 1.0 g/t Au cut-off as amenable to potential underground mining. See ASX announcement on 12 May 2026 "Maiden
Indicated Resource Declared at Monument Gold Project" for further information.
Verity Resources also holds a supply critical metals portfolio
Share your feedback
Discover